札幌デザイン制作会社 A4JP | Web制作、SEO、建築模型、写真撮影、3DCG、翻訳通訳 |

SCOOVO X9H: Marlin 3D Printer Firmware

SCOOVO X9H: SCV-X9H-S / SCV-X9H-BK

Download the Original Marlin Firmware
Version 1.0.0 for the Scoovo X9H 3D Printer

I needed to use Arduino 1.0.5 or an older version to update the firmware, as later versions could not load the add-in needed to load the RAMBo board. Without this the LCD could not be loaded.

Note: Ardunio version 1.6.7 nightly build worked. I still had to load the RAMBo board driver/plug via the preferences popup though.

https://raw.githubusercontent.com/ultimachine/ArduinoAddons/master/package_ultimachine_index.json

The first link is a zipped version of the original setup files for the Scoovo X9H 3D printer. They are covered by a general public license (GPL).

Download latest tested and updated driver from https://github.com/a4jp-com/MarlinDev/

Steps per millimeter – leadscrew driven systems

3mm leadscrew pitch
1066.67

Steps per millimeter – belt driven systems

Example

M92 g-code can set the steps per mm in real time. Here is an example with your result for X axis.

M92 X71.65

Optimal layer height for your Z axis

3mm / 200 = 0.015

Optimal layer height ★
In 0.015mm steps

Motor step angle
1.8° (200 per revolution)

Desired layer height
0.3mm

Leadscrew pitch
42mm sample distance / 14 ridges
42 ÷ 7 = 3
3mm/revolution

0.285 – 0.3 – 0.315 etc

TR14x3 Acme Lead Screw for the Z-axis

Nozzle diameter: 0.4mm + Filament diameter: 1.75mm

MXL cog 22 teeth

MXL Timing Belts – .080″ & 2.03 mm Pitch

B 76 MXL
pitch 6.08 inches, 154.432mm
76 teeth

B 295 MXL
6mm width
pitch 23.06 inches, 599.44mm
295 teeth

Check data here:
http://www.powertechno.co.jp/product/p_03_06.html

PDF Backup:

MXL･XLタイミングベルト-―株式会社パワーテクノ―Download

Server 1: http://www.sdp-si.com/D265/PDF/D265P1003.pdf

Server 2: https://a4jp.com/downloads/D265P1003.pdf

z-thread 14mm diameter (? 2mm pitch ?)

ShinanoKenshin Step Motor

Step Angle 1.8 degrees
Resistance / phase: 2.6 Ohms

1.8°/STEP 2.6Ω
STA-42D3023 (Fake number to hide real details of the motor by Shinano Kenshin)

Maybe this is the real model number SST45D012X
2 Phase Hybrid Stepping Motor 45D SERIES 42mm (NEMA17) High Holding Torque Model Unipolar
1.8 deg. step angle
3.1V
1.2A/theata
2.6 Ohms
1.8mH/theata
237mN-m
45g-cm2
6 pins
200g
32mm

4.2″ diameter stepper motor with a flange is a NEMA 42D

Hitachi HD44780 LCD display
94v0 LCD 16×4

ホームページへ